Fitment first · Trimmer · SKU B0F8Q3PDRR

12PC 14 feet *.095" Replacemnt AL2450s Precut Line

12PC 14 feet *.095" Replacemnt AL2450s Precut Line for EGO ST1502SA ST1511T ST1623T ST1611T ST1500SF ST1530 STA1500 STX3800, BCX3800 ST1502XY ST1500XY ST1504…

Live marketplace price $18
Buyer rating 4.0 / 5
Check price

Compatibility checkpoint

Verify this before you buy

2 listed model matches
1 Match the machine model

Compare the model printed on your trimmer label with the fitment list below.

2 Confirm the line and spool spec

.095"

3 Check the part code

Match part B0F8Q3PDRR or ASIN B0F8Q3PDRR against the listing and your old part.

Listed model matches
EGO ST1502SA ST1511T ST1623T ST1611T ST1500SF ST1530 STA1500 STX3800BCX3800 ST1502XY ST1500XY ST1504SF 15-Inch String Trimmer
Equipment brandEGO
ReplacesB0F8Q3PDRR
Pack12-pack
Spool typepre-cut line
CategoryTrimmer
ConditionNew aftermarket replacement

Overview

These pre-cut trimmer line segments take the guesswork out of reloading fixed-line and rapid-load trimmer heads. Instead of measuring and cutting line from a bulk spool, each piece is sized to fit directly into the trimmer head. This aftermarket line provides clean, consistent cuts and saves time during reloads.

Key specifications

  • Pre-cut replacement trimmer line segments
  • Line diameter: .095”
  • Piece length: 14 ft
  • 12 pieces per pack
  • Sized for rapid-load trimmer heads
  • No winding or measuring required

Compatibility

These pre-cut lines are designed for EGO trimmers with rapid-load heads as listed above. Confirm the line diameter and trimmer model match your equipment before ordering.

Installation notes

With the trimmer off, align the arrows on the trimmer head to expose the line insertion holes. Push a pre-cut piece through the head until equal lengths extend from both sides. Rotate the head to lock the line in position and pull both ends to confirm they are seated.

Common questions

Q: Will this .095” precut AL2450s line fit my EGO ST1511T and ST1623T, or is it only for the ST1500 series?

Yes, this 12-pack of 14-foot x .095” precut line is compatible with the EGO models listed, including the ST1511T and ST1623T as well as ST1500-series units like the ST1500SF and ST1504SF. As long as your trimmer uses the AL2450S-style line setup and matches the listed models, these precut pieces are the correct size and diameter.

Q: Do I need to cut this line down before installing it in my EGO STA1500 or STX3800 power head trimmer attachment?

No, these are already precut to 14 feet, so they are made to install at the correct length without additional trimming before loading. If you are replacing worn line on a compatible STA1500, STX3800, or BCX3800 setup, just remove the old line and load one precut piece according to your trimmer head’s instructions.

Q: Is .095” line a good choice for thicker grass on the EGO ST1502SA, and are there any tips to make it last longer?

Yes, .095” line is a solid choice for heavier trimming jobs like dense grass and weeds on the ST1502SA and similar 15-inch EGO string trimmers. To extend line life, avoid striking concrete, fence lines, and rocks directly, and clean the trimmer head regularly so the line feeds smoothly without binding.

Compatibility

This page lists compatible equipment gathered from the product fitment data. Always confirm the model number stamped on your machine before ordering.

EGO ST1502SA ST1511T ST1623T ST1611T ST1500SF ST1530 STA1500 STX3800BCX3800 ST1502XY ST1500XY ST1504SF 15-Inch String Trimmer

Not sure which spool you need? See our guide: How to wind a trimmer spool or How to measure your old spool.

Before you buy — how to verify fitment

  1. Find your trimmer model number. It's usually on a label on the motor housing, battery slot, or lower shaft.
  2. Check spool compatibility. Compare the model number with the compatibility list above.
  3. Verify line gauge. Confirm the line thickness matches what your trimmer head requires by checking your manual or the old spool.
  4. Inspect the spool housing. Make sure the spool diameter, cap, spring post, and feed style match your trimmer head.

Frequently asked questions

How do I know this spool fits my trimmer?

Check your trimmer model number against the compatibility list above. Then verify the line gauge (.065, .080, .095) matches what your trimmer head requires — it's usually printed on the spool cap or in the manual.

Can I rewind a pre-wound spool?

Yes. Once the factory line runs out, you can rewind the spool with bulk trimmer line of the same gauge. Pre-wound spools just save time on the first load.

How often should I replace the spool?

Replace the spool when the line no longer feeds properly, the spring loses tension, or the spool body is cracked. Under normal weekend use, a spool lasts 2–4 refills before the housing wears out.

What gauge trimmer line should I use?

Match the gauge to your trimmer's power: .065" for light-duty electric trimmers, .080" for mid-range cordless, and .095" for gas-powered or heavy-duty models. Using too thick a line can stall the motor.

Where to buy

This part is available through Amazon with free returns on most orders. Use the fitment details above to compare your model, old part number, and physical specs before ordering.

Check current price on Amazon

Affiliate disclosure: we may earn a commission when you purchase through this link, at no extra cost to you.

§ Compare

Similar Trimmer parts

§ Guides

Related how-to guides