Overview
Designed as a plug-and-trim aftermarket replacement, this pre-wound spool fits directly into the trimmer head without any custom winding. Factory spools eventually run out, and hand-winding bulk line can be time-consuming and prone to tangles. This replacement spool provides properly wound line that feeds smoothly from the first tap.
Key specifications
- Pre-wound replacement trimmer spool
- Line diameter: 0.065”
- Direct-fit for listed trimmer models
- Bump-feed compatible winding pattern
Compatibility
This spool is designed for Black+Decker string trimmers as listed above. Confirm the spool part number, line diameter, and trimmer model before ordering to ensure a proper fit.
Installation notes
Disconnect the battery or unplug the trimmer. Remove the bump knob or spool cover by pressing the release tabs. Lift out the used spool, insert the new one with the line routed through the exit holes, and replace the cover. Pull the line to confirm smooth feed before starting.
Common questions
Q: Will this DF-065 spool fit my BLACK+DECKER GH710, and does it also work with the GH700 and GH750 models?
Yes, this DF-065 replacement spool is made for the BLACK+DECKER GH710, GH700, and GH750 14-inch electric trimmer/edger models. It matches the 0.065-inch dual-line spool style that replaces part numbers 90517175, 90567225N, and 900745470.
Q: Is this the correct line size for my trimmer, and can I use it in place of the DF-065-BKP spool?
Yes, this spool uses 0.065-inch line, which is the correct size for the compatible GH710, GH700, and GH750 trimmers. It is designed as a replacement for the DF-065-BKP style dual-line feed spool, so it should function the same as long as your trimmer uses the listed spool part numbers.
Q: How do I install this DF-065 spool, and is there anything I should check if the line is not feeding correctly?
To install it, unplug the trimmer, remove the spool cap, take out the old spool, and place the new DF-065 spool in the housing with the line ends routed through the eyelets. If the line does not feed smoothly, check that the cap is fully seated, the line is not crossed or pinched, and the spool chamber is free of grass buildup before reassembling.
