Overview
This pre-wound replacement spool drops directly into compatible string trimmers, eliminating the hassle of hand-winding line. Worn or empty spools leave trimmer owners without a cutting edge mid-job. Keeping spare aftermarket spools on hand ensures minimal downtime and consistent line feed during yard work.
Key specifications
- Pre-wound replacement trimmer spool
- Direct-fit for listed trimmer models
- Bump-feed compatible winding pattern
Compatibility
This spool is designed for Craftsman string trimmers as listed above. Confirm the spool part number, line diameter, and trimmer model before ordering to ensure a proper fit.
Installation notes
Power off the trimmer and press the tabs on the spool housing to release the cover. Pull out the empty spool and clear any debris from the housing interior. Drop in the new spool, route the line through the eyelets, and snap the cover back on.
Common questions
Q: Will this replacement spool assembly fit my Bolens BL110 and Craftsman WC205, or do I need a different inner reel?
Yes, this spool assembly is made to replace the 731-10724-49 inner reel used on Bolens BL110/BL160 trimmers and the 753-1156 spool used on Craftsman WC205/WS205 models. As long as your trimmer matches those model numbers, this is the correct style of replacement spool assembly.
Q: How do I install this spool assembly on my Remington RM2510 without the line tangling right away?
First remove the trimmer head cap, take out the old spool, and clear any packed grass or debris from inside the housing before installing the new assembly. Make sure the line ends are routed through the eyelets correctly and that the spool sits fully in place, because if it goes in crooked the line can bind or feed unevenly.
Q: Is this the right spool for a Murray M2500, and what should I check if the line is not feeding properly after replacement?
Yes, this replacement spool assembly is compatible with the Murray M2500 if it uses the same trimmer head style listed for this part. If line feed is poor after installation, check that the cap is snapped on securely, the spool is not overfilled or cross-wound, and the eyelets and bump head are free of dirt and wear.
