Overview
This 14” bar and chain combo provides everything needed to restore a chainsaw’s cutting system in one purchase. Running a new chain on a worn bar (or vice versa) accelerates wear on both components. Replacing them together ensures matched tolerances, smooth tracking, and consistent oil distribution from the start.
Key specifications
- 14” guide bar and chain combo
- Matched bar and chain for optimal tracking
- Low-kickback design for safer operation
Compatibility
This combo set is designed for Ryobi chainsaws as listed above. Verify bar length, pitch, gauge, and drive link count match your saw’s requirements before purchasing.
Installation notes
Remove the side cover and old bar assembly. Clean the mounting area and oil port thoroughly. Mount the new bar, loop the chain around the drive sprocket with the cutters facing the correct direction, and set initial tension. Run the saw for 30 seconds, then re-tension the chain once it warms up.
Common questions
Q: Will this 14 inch bar 311482001 fit my Ryobi RY40503VNM 40V HP Brushless chainsaw, or is it only for the RY3714?
Yes, this replacement bar is compatible with the Ryobi RY40503VNM as well as the RY3714 and other listed models including RY40530, RY-40503, RY405010, RY405010BTL, and RY405100. It is the correct 14 inch guide bar replacement for applications using bar number 314675001 and replacement reference 311482001.
Q: I have a Ryobi RY405100 and my original bar is worn out—do I need anything special to install this 311482001 bar?
Installation is straightforward: remove the side cover, release chain tension, take off the old bar and chain, then mount the new 14 inch bar and reinstall the chain in the correct cutting direction. Before tightening everything down, make sure the tension pin seats properly in the bar hole and that the chain is correctly aligned in the bar groove.
Q: How do I keep this 14 inch replacement bar in good shape on my Ryobi RY40530?
Check chain tension regularly, keep the bar groove clean, and confirm the oiling system is delivering bar oil to the chain during use. It also helps to inspect the bar rails for uneven wear and flip the bar periodically, if applicable, to promote more even wear over time.
